AUMA SAR 07.2 User Manual

Read operation instructions first.
●
Observe safety instructions.
●
These operation instructions are part of the product.
●
Store operation instructions during product life.
●
Pass on instructions to any subsequent user or owner of the product.
Target group:
This document contains information for assembly, commissioning and maintenance staff.
Reference documents:
●
Manual (Operation and setting) of actuator controls AC 01.2 DeviceNet
●
Manual (Fieldbus device integration) of actuator controls AC 01.2 DeviceNet
Reference documents are available on the Internet at: http://www.auma.com.
Table of contents Page
51. Safety instructions.................................................................................................................
51.1. Prerequisites for the safe handling of the product
51.2. Range of application
61.3. Warnings and notes
61.4. References and symbols
72. Short description...................................................................................................................
93. Name plate..............................................................................................................................
134. Transport and storage...........................................................................................................
134.1. Transport
154.2. Storage
175. Assembly................................................................................................................................
175.1. Mounting position
175.2. Handwheel fitting
175.3. Mount actuator to valve
185.3.1. Overview of output drive types
185.3.2. Output drive type A
195.3.2.1. Multi-turn actuator with output drive type A: mount
215.3.2.2. Stem nut for output drive type A: finish machining
225.3.3. Output drive types B/C/D and E
235.3.3.1. Multi-turn actuator with output drive type B: mount
245.4. Accessories for assembly
245.4.1. Stem protection tube for rising valve stem
255.5. Mounting positions of local controls
255.5.1. Mounting positions: modify
266. Electrical connection.............................................................................................................
266.1. Overview of AUMA electrical connections
266.2. Basic information
296.3. SJ electrical connection (AUMA plug/socket connector)
306.3.1. Terminal compartment (for mains connection): open
316.3.2. Cable connection
326.3.3. Terminal compartment (for mains connection): close
2
SA 07.2 – SA 16.2 / SAR 07.2 – SAR 16.2 Control unit: electronic (MWG)
Table of contents AC 01.2 Non-Intrusive DeviceNet

AUMA SAR 07.2 Specifications

General

Brand	AUMA
Model	SAR 07.2
Category	Controller
Language	English