AUMA SAR 07.2 - Page 4

7310.5.2. Direction of rotation at hollow shaft/stem: check
7310.5.3. Limit switching: check
7511. Commissioning (settings/options in the actuator).............................................................
7511.1. Switch compartment: open/close
7611.2. Mechanical position indicator (self-adjusting)
7611.2.1. Mechanical position indicator: set
7711.2.2. Gear stage of the reduction gearing: test/set
7811.3. Mechanical position indication via indicator mark (not self-adjusting)
7811.3.1. Mechanical position indicator: set
7811.3.2. Gear stage of the reduction gearing: test/set
8112. Corrective action....................................................................................................................
8112.1. Faults during commissioning
8112.2. Fault indications and warning indications
8512.3. Fuses
8512.3.1. Fuses within the actuator controls
8612.3.2. Fuse replacement
8612.3.2.1. Replace fuses F1/F2
8612.3.2.2. Test/replace fuses F3/F4
8712.3.3. Motor protection (thermal monitoring)
8813. Servicing and maintenance...................................................................................................
8813.1. Preventive measures for servicing and safe operation
8913.2. Maintenance
8913.3. Disposal and recycling
9014. Technical data.........................................................................................................................
9014.1. Technical data Multi-turn actuators
9214.2. Technical data Actuator controls
9714.3. Tightening torques for screws
9915. Spare parts.............................................................................................................................
9915.1. Multi-turn actuators SA 07.2 – SA 16.2/SAR 07.2 – SAR 16.2
10115.2. AC 01.2 actuator controls with SJ electrical connection
105Index........................................................................................................................................
4
SA 07.2 – SA 16.2 / SAR 07.2 – SAR 16.2 Control unit: electronic (MWG)
Table of contents AC 01.2 Non-Intrusive DeviceNet