ENGINE MANUAL
IAE50R – AA
Issue date: 25.Jan.2018
Page: 19-27
General information about D0160 tests.
Sensors and actuators are tested during basic certification with the test levels stated
above. For the requalification of the new AE ECU for the IAE50R the test levels from the
basic certification are assumed and applied dedicated to the ECU.
*DO-160D Section 11 was tested during the basic certification from Midwest Company.
19.6.3 Control System Reliability
19.6.3.1 Control system reliability objective.
Certification requirements states a reliability objective to be quoted in the engine manual.
The control system has been designed to meet AMJ20X–target reliability of 1 in 100,000 hours
when operated in accordance with Austro Engine GmbH stated maintenance and installation
specification.
19.6.3.2 Software Quality level
In accordance with DO 178B level C.
To Previous Page
Loading...
Need help?
General
