59
Figure 4-26 Sample Vehicle Selection Screen
Select Automatic Selection and the system will proceed to acquire VIN
information automatically or allow users to input the VIN manually.
Manual VIN Input
For some vehicles that do not support the Auto VIN Scan function, the
MaxiSys diagnostic system allows you to enter the vehicle VIN manually, or
simply take a photo of the VIN sticker for quick vehicle identification.
To perform Manual VIN Input
1. Tap the ADAS application button from the MaxiSys Job Menu. The Vehicle
Menu displays.
2. Tap the VIN Scan button on the top toolbar.
3. Select Manual Input.
4. Tap the input box and enter the correct VIN.
Figure 4-27 Manual VIN Input
5. Tap Done. The vehicle will be identified in a few seconds, and once the
matching is successful, the system will guide you to the ADAS Function
screen directly.
To Next Page
Loading...
