8.5.1. MAINTENANCE KIT
REFERENCE DESCRIPTION
QUANTITY(IES)
3
1 BL 3 BL 5 BL 10 BL
2 TO
3 M
3,5 TO
6 M
2 TO
3 M
3,5 TO
6 M
2 TO
3 M
3,5 TO
6 M
2 TO
3 M
3,5 TO
6 M
KIT-BL229-I MAINTENANCE KIT FOR BL229 STD - AS1620 - 230V - SPRING 5,5mm
1 2 2
KIT-BL229-J MAINTENANCE KIT FOR BL229 STD - AS1620 - 230V - SPRING 7,0mm
1 2 2
KIT-BL229-M MAINTENANCE KIT FOR BL229 STD - AS1620 - 120V - SPRING 5,5mm
1 2 2
KIT-BL229-N MAINTENANCE KIT FOR BL229 STD - AS1620 - 120V - SPRING 7,0mm
1 2 2
KIT-BL229-K MAINTENANCE KIT FOR BL229 TOLL - AS1620 - 230V - SPRING 5,5mm
1 2 2
KIT-BL229-O MAINTENANCE KIT FOR BL229 TOLL - AS1620 - 120V - SPRING 5,5mm
1 2 2
8.5.2. VENTILATION KIT
If your gate is equipped with a ventilation kit ( Chap. 9.2, page 44), it will be necessary to replace the filter regularly.
REFERENCE DESCRIPTION QUANTITY
E/7002/011
HOOD FILTER 185 X 185 MM
2 per barrier
The total quantity to be foreseen will depend on the environment (dust, sand,...) in which the equipment is located and the
number of barriers.
8.6. PROLONGED STOPPAGE / DESTRUCTION
If the barrier is not to be used for a long period, it is advised:
• To place the barrier in a dry place that is protected from heat and bad weather.
• To leave the barrier turned on. With the motor remaining permanently powered, a certain temperature is maintained
in the housing. This eliminates problems of condensation and, at low temperature, prevents the gear motor’s oil
from solidifying, which would cause the performances of the barrier to fail during the first operations following to a
long period of disuse.
When you decommission the equipment, empty the oil from the gear motor ( Rep. 20, page 9) and scrap the various
components of the machine by the appropriate means (metal parts, electronic components, etc) according to the legislation
in force in the considered country.
3 For quantities of more than 10 units, please contact our after-sales service..
42
BL 229
To Next Page
Loading...