Autonics TK4M User Manual

Safety Precautions
vi © Copyright Reserved Autonics Co., Ltd.
Safety Precautions
 Following these safety precautions will ensure the safe and proper use of the product
and help prevent accidents, as well as minimizing possible hazards.
 Safety precautions are categorized as Warnings and Cautions, as defined below:
Warning
Failure to follow the instructions may lead to a serious injury
or accident.
Caution
Failure to follow the instructions may lead to a minor injury
or accident.
 If using the product to control machines or devices having serious impact potential on
lives and/or property (applications in nuclear power plants, medical equipment,
vehicles, trains, aviations, combustion systems, entertainment devices, safety devices,
etc.), Always use in conjunction with redundant failsafe systems in place.
It may cause fire, personal injury, and/or property loss if not followed.
 Always install the unit on a panel.
It may cause an electric shock if not followed.
 Never wire, repair, or inspect the unit while electricity is flowing through it.
It may cause an electric shock if not followed.
 Check the input power specifications and terminal polarity before connecting the
wires.
It may cause a fire if not followed.
 Only an Autonics technician is authorized to service or modify the product.
It may cause an electric shock or fire if not followed.
 Do not use outdoors.
It may shorten the life of the product and/or cause an electric shock if not followed.
 Always use AWG 20 (0.5 mm
2
) or higher when wiring to the relay's output terminals.
It may pose a fire risk if not followed.
 Always use within the range of rated specifications and performance.

Autonics TK4M Specifications

General

Brand	Autonics
Model	TK4M
Category	Temperature Controller
Language	English