4. Select one of the following:
• Information
• Black
• Black also in call
5. Press Back.
Note:
When charging the handset in a DP1 Desktop Programmer or CR3 Charging Rack,
information is replaced by the large license indicator shield. When in the desktop charger
it is the same as when out of the charger.
Changing brightness
Procedure
1. Press Menu.
2. Select Settings.
3. Select Display > Brightness.
4. Select any of the following:
• Normal
• Power save
5. Press Back.
Phone Lock settings
Activating automatic key lock
Procedure
1. Press Menu.
2. Select Settings.
3. Select Locks > Automatic key lock.
4. Select On for activation of automatic key lock.
Customizing Avaya 3730 DECT handsets
July 2017 Using Avaya 3730 DECT handsets connected to Avaya Integral Enterprise Software
IEE 7.2 52
Comments on this document? infodev@avaya.com
To Next Page
Loading...
