use of the device at the ear is 0.201 W/kg and at the body is 0.278 W/kg (The measure distance of
1.5 cm). Use of device accessories and enhancements may result in different SAR values. SAR
values may vary depending on national reporting and testing requirements and the network band.
Regulatory Compliance Statements (USA and Canada only)
FCC ID:
DH6–xxxx:BXZDH6
IC:
DH6–xxxx3724B-DH6
FCC and IC compliance statements
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antennas.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio or TV technician for help.
Note:
Privacy of communications may not be ensured when using this handset.
Exposure to radio frequency signals
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This device complies with FCC SAR limit of 1.6 W/kg. The maximum SAR value
measured is:
Head
Body
DH6–xxxx TBD W/kg TBD W/kg
Safe operation
July 2017 Using Avaya 3730 DECT handsets connected to Avaya Integral Enterprise Software
IEE 7.2 67
Comments on this document? infodev@avaya.com
To Next Page
Loading...
