Setting the 802.1X operational mode
Issue 5 August 2014 45
Setting the 802.1X operational mode
!
Important:
Important: The DOT1X configuration parameter must be set to “0” or “1” for the deskphone
to support 802.1X pass-thru and the DOT1XSTAT configuration parameter must
be set to “1” or “2” for the deskphone to support supplicant operation. For more
information, see the Administering Avaya Deskphone SIP for 9601/9608/9608G/
9611G/9621G/9641G.
Use the following procedure to set or change the operational mode.
1. Use the Craft password to gain access to the Admin Procedures screen. The default
password is 27238.
2. When you select 802.1X from the Admin Procedures screen, the two settings shown
represent the text strings associated with the current configuration parameter values of
DOTIX (802.1X Pass-Thru Mode) and DOT1XSTAT (802.1X Supplicant Mode), defined as
follows:
For the Pass-thru mode:
● “On” if DOT1X = 0
● “Pass-thru mode + on & proxy logoff” if DOT1X = 1
RESET VALUES Reset system initialization
values to defaults
Resetting system values on page 57.
RESTART PHONE Restart the deskphone
Restarting the deskphone on
page 58.
SIG Set the signaling protocol
download flag
Setting the signaling protocol
identifier on page 58.
SIP Configure SIP call settings
Configuring SIP settings on page 59.
SNTP Configure the time server
settings
Configuring Time Server settings on
page 61.
SSON Set the Site-Specific Option
Number
Setting Site-Specific Option
Number on page 62.
VIEW View current parameter values
and file names
Using the View administrative
option on page 63.
Shown As Craft Procedure Purpose See
To Next Page
Loading...
