Avaya 9601 - Setting Site-Specific Option Number

Local administrative options
62 SIP Deskphones Release 6.4 Installation and Maintenance Guide
2. When you select SNTP... from the Admin Procedures screen, the deskphone displays the
following settings and prompts you to enter the IP Address of the SNTP server:
3. Press Save to store the new setting and redisplay the Admin Procedures screen.
Setting Site-Specific Option Number
!
CAUTION:
CAUTION: Do not perform this procedure if you are using static addressing. Perform this
procedure only if you are using DHCP and the LAN administrator instructs you to
do this.
Use the following procedure to set the Site-Specific Option Number (SSON).
1. Use the Craft password to gain access to the Admin Procedures screen. The default
password is 27238.
2. When you select SSON... from the Admin Procedures screen, the following text displays:
where the setting is the current system value of DHCP_SSON.
3. To change the setting, press the appropriate softkey(s) and use the dialpad to enter a valid
SSON value between 128 and 255.
4. Press Save to store the new setting and redisplay the Admin Procedures screen.
Description/Example
Changes this
Parameter
SNTP Server:
SNTP GMT Offset:
SNTP Daylight
Savings Time Off/
On/Auto:
IP address or DNS Name of the
network time server.
Local time difference in hours from
Greenwich Mean Time, e.g., NJ is
-5.
Indicates whether the deskphone
should recognize Daylight Savings
Time (DST)(0=no DST, 1=DST
activated as per DSTOFFSET,
2=automatic based on DSTSTART
and DSTSTOP values.
SNTPSRVR or
SNTPSRVR_IN_USE
GMTOFFSET
DAYLIGHT_SAVING_
SETTING_MODE
Setting: