Avaya 9601 - Using the View Administrative Option

Using the View administrative option
Issue 5 August 2014 63
Using the View administrative option
If you are using static addressing and encounter problems, use the following procedure to verify
the current values of system parameters and file versions.
Note:
Note: Unless otherwise prevented using administration, the user can view but not
change most of the parameters associated with Craft Local Procedures. For
more information about this option, see the applicable user guide(s).
If the View Network Information option is not available due to being disabled by
administration, use the ADDR option to view IP Addresses. See
Installing static
addressing on page 47. The IP Addresses might have been entered incorrectly.
Verify whether you were provided with correct IP Addresses.
1. Use the Craft password to gain access to the Admin Procedures screen. The default
password is 27238.
2. When you select VIEW from the Admin Procedures screen, the following text displays:
Setting Description
Associated
Configuration
Parameter
Model The model of the
deskphone that is set by
factory procedures.
MODEL
Application File The name of the Signed
Application/Library software
package.
Kernel/RFS File The name of the Kernel/
Root File System software
package.
Backup App File The name of the backup
copy of the Signed
Application/Library software
package stored in the
phone.
Group The group identifier to
download during start-up a
specific configuration set
for a dedicated user group.
GROUP
MAC The MAC address of the
deskphone.
MACADDR