Avaya 9608 - Page 103

Administering options for the 9608, 9611G, 9621G, and 9641G SIP Deskphones
Issue 1 May 2011 103
PROVIDE_TRANSFER_
TYPE
0 Flag to determine whether user can select a
Transfer Type (Attended/Unattended). Applies to
failover environments only. Value is: 0=user
cannot select a transfer type, transfer type not
shown.
PSTN_VM_NUM " " (Null) Telephone number to be used by the messaging
application in a non-Avaya or failover server
environment. A "dialable" string representing
deskphone number or Feature Access Code. This
dialable string is used to call into the messaging
system (e.g. when pressing the Message Waiting
button).
PUSHCAP 00000 String representing push capabilities. Applies to
phones running software Release 2.2 only. Values
are: 5 ASCII numeric digits, "00000" to "22222".
PUSHPORT 80 String representing the TCP listening port number
used for the deskphone's HTTP server. Applies to
phones running software Release 2.2 only. Values
are: 2 to 5 ASCII numeric digits, "80" through
"65535".
QKLOGINSTAT 1 Quick login status indicator. Specifies whether a
password must always be entered manually, when
the deskphone is in a "registered and inactive"
state (another deskphone is used to take over a
primary extension e.g. SIP visiting User). Valid
values are:
0 = manual password entry is mandatory.
1 = quick-login is enabled; a "quick-login" is
possible by pressing the Continue softkey on the
login screen to accept the current password value.
Note: If set via the settings file this value is given a
precedence of 3. If set via PPM in the
ListOfMaintenanceData element of the
getAllEndpointConfigurationResponse this value is
given a precedence of 4.
RDS_INITIAL_RETRY_
ATTEMPTS
15 Indicates how many times the PPM adaptor should
try to download from PPM before giving up on
connecting to the PPM server. Values are: 1-30.
RDS_INITIAL_RETRY_
TIME
2 Remote Data Source initial retry time in seconds;
indicates the initial delay for a retry to connect to
the PPM server. Valid range is 2-60 (seconds).
Parameter Name Default
Value
Description and Value Range
21 of 30