Avaya 9608 - Deskphone Initialization Process Overview; Step 1: Accessing the Network

Deskphone Initialization Process Overview
Issue 1 May 2011 25
Deskphone Initialization Process Overview
These steps offer a high-level description of the information exchanged when the deskphone
initializes and registers. This description assumes that all equipment is properly administered
ahead of time. The Avaya one-X™ Deskphone SIP Installation and Maintenance Guide for
9608, 9611G, 9621G, and 9641G Deskphones (Document Number 16-603604) provides a
detailed description of initialization (power-up and reset).
Step 1: Accessing the network
The deskphone is appropriately installed and powered. After a short initialization process, the
deskphone displays the speed at which it is connected to the network and determines whether
to initiate 802.1X network access procedures.
Installation of
deskphones in the
network
Avaya one-X™ Deskphone SIP
Installation and Maintenance Guide
for 9608, 9611G, 9621G, and 9641G
Deskphones (Document Number
16-603604).
Allow user to modify
Options, if applicable
Set the following parameters in the
settings file:
ENABLE_CALL_LOG
ENABLE_CONTACTS
ENABLE_MODIFY_CONTACTS
ENABLE_PHONE_LOCK
ENABLE_PRESENCE (for SES/SM
environments)
PROVIDE_EDITED_DIALING
PROVIDE_LOGOUT
PROVIDE_NETWORKINFO_
SCREEN
PROVIDE_OPTIONS_SCREEN
PROVIDE_EXCHANGE_
CALENDAR
.
Task Description For More Information See:
3 of 3