Avaya 9608 - Setting the Date and Time on SIP Deskphones; About Presence

Administering Telephone Options
132 Deskphone SIP 9608, 9611G, 9621G, 9641G Administrator Guide Release 6.0.1
Example 2 - In the Contacts list, save Contact X with the telephone number 41018989:
See 9600 Series SIP Deskphones customizeable system parameters
for a definition of the
DIALPLAN parameter.
Setting the date and time on SIP Deskphones
SIP deskphones need a source of date and time information. This typically comes from a
network time server running the Simple Network Time Protocol (SNTP). The deskphones use
several administrative parameters for this functionality. The parameter SNTPSRVR defines the
server’s IP Address(es). GMTOFFSET defines the offset from Greenwich Mean Time (GMT).
DSTSTART and DSTSTOP define the start and end of Daylight Savings Time, respectively.
DSTOFFSET defines the Daylight Savings Time offset from Standard Time. Finally,
DATETIMEFORMAT defines the format of the date and time display. See 9600 Series SIP
Deskphones customizeable system parameters for definitions and valid values for SIP Date and
Time parameters.
About Presence
Presence tracking is managed by the presence server. In SIP software release 6.0.1, SP1,
identity mapping for presence is based on the contact’s enterprise phone number. Presence
administration is dependent on your operating environment, for example, the servers and
software in place. For information about administering presence in specific environments
search on "presence" at http://support.avaya.com.
PHNLAC
Parameter
Value
LOCAL_DIAL_AREA_CODE
Parameter Value
Step to
Execute
Result
020 1 Call X from
Contacts list
Phone sends an invite
message with
2702041018989.
020 0 Call X from
Contacts list
Phone sends an invite
message with 2741018989
and does not insert the
local area code.
Null 1 Call X from
Contacts list
Phone sends an invite
message with 2741018989
and does not insert the
local area code.