Avaya Aura
®
Communication Manager Administration
52 Deskphone SIP 9608, 9611G, 9621G, 9641G Administrator Guide Release 6.0.1
Call transfer considerations
Unlike 9600 H.323 IP Deskphones, the 9600 Series SIP Deskphones transfer operation is
controlled locally by the deskphone and is not affected by the settings Abort Transfer?, Transfer
Upon Hang-up and Toggle Swap, on page 7 of the system-parameters features screen.
Conferencing call considerations
Unlike 9600 H.323 IP Telephones, the 9600 Series SIP Deskphones conference operation is
controlled locally by the phone and is not affected by the settings Abort Conference Upon
Hang-up, No Dial Tone Conferencing, Select Line Conferencing and Toggle Swap, on page 7 of
the system-parameters features screen.
Administering SIP Deskphones on Avaya Aura
Communication Manager
SIP feature support summarizes the calling features available on 9600 Series SIP IP
Telephones. Some features are supported locally at the deskphone, while others are only
available with Avaya SIP Enablement Services and Communication Manager with OPS.
The features shown in SIP feature support
can be invoked at the phone either directly or by
selecting a CM-provisioned feature button. Communication Manager automatically handles
many other standard calling features such as call coverage, trunk selection using Automatic
Alternate Routing (AAR), or Automatic Route Selection (ARS), Class Of Service/Class Of
Restriction (COS/COR), and voice messaging. Details on feature operation and administration
can be found in the Feature Description and Implementation for Avaya Communication
Manager (Document Number 555-245-205) and any of the CM administration documents
available on the Avaya support site. The Avaya SIP solution configures all SIP deskphones in
Communication Manager as OPS.
For a complete list and comparison of feature availability based on SES versus Session
Manager configurations, see the document titled Avaya Aura
®
Services - SIP Handset Features
on the Avaya support Web site: www.avaya.com/support.
Note:
Note:
Features activated in CM can only be deactivated via CM; features activated
during failover can only be deactivated during the failover period.
To Next Page
Loading...
