Network Requirements
34 Deskphone SIP 9608, 9611G, 9621G, 9641G Administrator Guide Release 6.0.1
The 9600 Series SIP IP Telephones support specifying a list of IP Addresses for a gateway/
router and the HTTP/HTTPS server, and Avaya call servers. Each list can contain up to 255
total ASCII characters, with IP Addresses separated by commas with no intervening spaces.
Depending on the specific DHCP application, only 127 characters might be supported.
When specifying IP Addresses for the file server, use either dotted decimal format
(“xxx.xxx.xxx.xxx”) or DNS names. If you use DNS, the system value DOMAIN is appended to
the IP Addresses you specify. If DOMAIN is null, the DNS names must be fully qualified. For
more information about DNS, see DHCP Generic Setup
on page 66 and About DNS
addressing on page 117.
Required network information before installation - per DHCP
server
As the LAN or System Administrator, you are also responsible for:
●
Administering the DHCP server as described in Chapter 6: Server Administration.
●
Editing the configuration file on the applicable HTTP or HTTPS file server, as covered in
Choosing the right application file and upgrade script file
.
Other network considerations
Enabling SNMP
The 9600 Series SIP IP Telephones are fully compatible with SNMPv2c and with Structure of
Management Information Version 2 (SMIv2). The deskphones respond correctly to queries from
1. Gateway (router) IP Address(es)
2. HTTP/HTTPS file server IP Address(es), port number (if
different from the default), and directory path (if files are not
located in the root directory)
3. Subnetwork mask
4. HTTP server file path (HTTPDIR)
5. Telephone IP Address range
From:
To:
6. DNS server address(es) if applicable
To Next Page
Loading...
