Customizing ring tones
Issue 1 May 2011 137
Ringtone XLS cell descriptions
Cell Name Description Comment
Ringer Name Name of this custom Ring Tone file, for
example, Ringtone1
This filename will be
assigned a .XML extension
upon completing all
required cells and pressing
the "Create xml" cell
button.
Ringer Index This numbers the xml file as one of the 8
patterns used in personalized ringing. For
example, index 2 will be the second
personalized ringing choice a user will have
on their phone. Eight xml files with indices
1-8 need to be created to customize all the
available personalized ringing choices that
will be presented on a phone. If less than 8
indices/files are set in the settings file,
Avaya standard ringing patterns will be
used for the missing indices.
Type of Wave Leave empty; this cell is not currently used. Reserved for future use.
Number of Active
Frequencies
Up to four active frequencies can be set.
Valid values are 1, 2, 3, or 4.
Frequency Values The range of frequency values is from 0 to
3999Hz.
Number of Notes Number of notes in this ring tone, from 1 to
3. A note is an interval in which a frequency
is used. Currently, a custom ring tone has a
3 note maximum.
Note 1, 2, and 3 This value represents a collection of
frequency intervals that are grouped
together and repeated over and over again
as the ring tone.
Note Pulse State The pulse state has two possible settings -
On or Off
Note Frequency The frequency used for a particular note.
Note Duration The duration of the note in milliseconds,
from 0 to 2^16.
To Next Page
Loading...
