Administering settings at the deskphone
Issue 1 May 2011 127
Administering settings at the deskphone
The Avaya one-X™ Deskphone SIP Installation and Maintenance Guide for 9608, 9611G,
9621G, and 9641G Deskphones (Document Number 16-603604) details how to use Craft local
procedures at the deskphone for administration. The local procedures you might use most often
as an administrator are:
●
ADDR - Static address programming.
●
CLEAR - Remove all administered values, user-specified data, option settings, etc. and
return a deskphone to its initial “out of the box” default values.
●
DEBUG - Enable or disable debug mode for the button module serial port.
●
GROUP - Set the group identifier on a per-phone basis.
●
INT - Locally enable or disable the secondary Ethernet hub.
●
RESET - Reset the deskphone to default values including the registration extension and
password, any values administered through local procedures, and values previously
downloaded using DHCP or a settings file.
●
RESTART - Restart the deskphone in response to an error condition, including the option
to reset parameter values.
●
SIG - Change the default signaling value to/from SIP, or change SIG to/from H.323.
Chapter 2 of the Avaya one-X™ Deskphone SIP Installation and Maintenance Guide for
9608, 9611G, 9621G, and 9641G Deskphones (Document Number 16-603604) also
describes how to determine which SIG value is appropriate for your environment.
●
SIP - Configure SIP call settings.
●
VIEW - Review the system parameters for the deskphone to verify current values and file
versions.
Administering display language options
9600 Series IP Telephones are factory-set to display information in the English language. In
addition to English, SIP software bundle downloads include the following language files:
●
Canadian French
●
Parisian French
●
Latin American Spanish
●
German
●
Brazilian Portuguese
●
Italian
●
Dutch
●
Castilian Spanish
●
Russian
●
Simplified Chinese
●
Japanese
●
Korean
To Next Page
Loading...
