Administering Telephone Options
106 Deskphone SIP 9608, 9611G, 9621G, 9641G Administrator Guide Release 6.0.1
SEND_DTMF_ TYPE 2 Defines whether DTMF tones are send in-band
(regular audio) or out-band (negotiation and
transmission of DTMF according to RFC 2833,
with fallback to send in-band DTMF tones, if far
end does not support RFC2833). Values are
1=in-band DTMF; 2=RFC2833 procedure.
SIG 0 Parameter indicating which Software Distribution
Package to download during start-up or reboot;
indicates which of the specific configuration sets
for H323 or SIP endpoints applies. Valid values
are:
0=Default; For software releases prior to 6.0,
Default means the default protocol as determined
by the 96xxupgrade.txt file (a custom upgrade file
is required to support both protocols). For software
releases 6.0 and later, Default means to download
the upgrade file for the same protocol that is
supported by the software that the telephone is
currently using.
1=H323
2=SIP
SIG_PORT_LOW 1024 Lower limit of port range for signaling to support by
the phone. Values range from 1024 to 65503.
SIG_PORT_RANGE 64511 Port range for signaling to support by the phone.
Values range from 32 to 64511.
SIMULTANEOUS_
REGISTRATIONS
3 Defines the number of simultaneous Session
Manager registrations that the phone should
maintain. Valid values are 1-3.
Parameter Name Default
Value
Description and Value Range
24 of 30
To Next Page
Loading...
