Administering Telephone Options
90 Deskphone SIP 9608, 9611G, 9621G, 9641G Administrator Guide Release 6.0.1
ENABLE_G711U 1 Enable or disable G711U codec capability of the
phone. If the parameter is set to 1, the phone
includes G711U capability in an outbound INVITE
request, and accepts G711U when received in an
incoming INVITE request. Values are 0=disabled;
1=enabled.
ENABLE_G722 0 Enable or disable G722 capability of the
deskphone. If the parameter is set to 1, the phone
includes G722 capability in an outbound INVITE
request, and accepts G722 when received in an
incoming INVITE request. If set to 0, processing of
G722 as a capability is disabled.
Values are 0=disabled, off; 1=enabled, on.
ENABLE_G726 1 Enable or disable G726 capability of the
deskphone. If the parameter is set to 1, the
deskphone includes G726 capability in an
outbound INVITE request, and accepts G726
when received in an incoming INVITE request.
Values are 0=disabled, off; 1=enabled, on.
ENABLE_G729 1 Enable or disable G729A codec capability of the
phone. Values are:
0=G.729 disabled. If set to 0, processing of G729A
as a capability is disabled.
1 = The phone advertises a preference for
"G.729(A) enabled, without Annex B support" in an
outbound INVITE request, and accepts either
G729A or G729A with annex B support [G.729AB]
when received in a 200OK response or an
incoming INVITE request. If set to 1, Incoming
INVITE request: the phone accepts either G729(A)
or G729AB.
2 = The phone advertises a preference for
"G.729(A) enabled, with Annex B support
[G.729AB]"in an outbound INVITE request, and
accepts either G729A or G729AB when received
in a 200OK response or an incoming INVITE
request. If the parameter is set to 2, Incoming
INVITE request: the phone accepts either G729A
or G729AB.
ENABLE_MODIFY_
CONTACTS
1 Enable or disable the ability to modify contacts if
the Contact application is enabled. Values are
0=disabled; 1=enabled.
ENABLE_PHONE_LOCK 0 Enables the local Phone Lock feature. Values are:
0 = Lock Softkey and Feature Button are not
displayed.
1= Lock Softkey and Feature Button are displayed
Parameter Name Default
Value
Description and Value Range
8 of 30
To Next Page
Loading...
