Avaya 9608 - Chapter 18: Locking and logging in to and logging out of your deskphone; Logging In and Locking the Deskphone

Administering options for the 9608, 9611G, 9621G, and 9641G SIP Deskphones
Issue 1 May 2011 99
NO_DIGITS_TIMEOUT 20 Number of seconds of delay after going "off-hook"
or getting secondary dial tone before phone
automatically plays a warning tone and does not
accept dial input any longer. Range in seconds is 1
to 60.
OUTBOUND_
SUBSCRIPTION_
REQUEST_DURATION
86400 Number of seconds used in initial SUBSCRIBE
messages. This is the suggested duration value of
the deskphone, which might be lowered by the
server, depending on the server configuration.
Range is 60-31536000. Note that the default value
is equal to one day and the maximum value
represents one year.
PHONE_LOCK_
IDLETIME
0 Sets the idle time for the Phone Lock feature.
Values are: 0 = the phone does not lock.
1-999 - the phone locks after this value (in
minutes).
PHNEMERGNUM " " (Null) The number dialed when the Emerg softkey is
pressed, or when a pop-up screen for making an
emergency call is confirmed.
PHNCC 1 Telephone country code. The administered
international country code for the location by the
algorithm that dials calls from the incoming Call
Log or from Web pages. Range: 1-3 digits, from
“1” to “999.”
PHNDPLENGTH 5 Internal extension deskphone number length.
Specifies the number of digits associated with
internal extension numbers by the algorithm that
dials calls from the incoming Call Log or from Web
pages. Range: 1 or 2 digits, from “3” to “13.”
PHNEMERGNUM " " (Null) Emergency Number. 0 to 30 dialable characters
(0-9, * , and/or #). This number is dialed when the
Emergency softkey is pressed, or when a pop-up
screen for making an emergency calls is
confirmed.
PHNIC 011 Telephone international access code. The
maximum number of digits, if any, dialed to access
public network international trunks by the
algorithm that dials calls from the incoming Call
Log or from Web pages. Range: 0-4 digits.
PHNLAC " " (Null) String representing the local area code. When set,
this parameter indicates the endpoint’s local area
code, which, along with the configuration
parameter LOCAL_DIAL_AREA_CODE allows
users to dial local numbers with more flexibility.
PHNLD 1 Telephone long distance access code. The digit, if
any, dialed to access public network long distance
trunks. Range: 1 digit (0 to 9) or " " (Null). Needed
for "Enhanced Local Dialing Algorithm".
Parameter Name Default
Value
Description and Value Range
17 of 30