Telephone stand
The phone can be placed on the stand in a flat position or at an angle.If you have placed the
phone
vertically for wall mounting, reverse the tab located under the switchhook in the top ear
piece pocket on the phone to ensure that the handset is in the correct position. You need a
small screwdriver to lift the tab after it is reversed.
Viewing Network Information
Your system administrator might ask you to check certain phone or network settings to
investigate problems. You can obtain network information from the Avaya Menu.
Network
Information has seven different screens for viewing the options:Audio parameters, IP
(Internet Protocol) parameters, Quality of Service, Interfaces, 802.1X Parameters,
Miscellaneous, and Diagnostics.
Your system administrator will instruct you further as to which network information options and
settings are needed.
Telephone stand
Using Avaya 9608/9608G/9611G IP Deskphones SIP January 2014 19
To Next Page
Loading...
