Putting a conference call on hold
About this task
When you put a conference call on hold, the other parties can still talk to each other.
Procedure
1.
Press Hold during a conference call.
2. Press Resume or OK to resume the conference call.
Dropping the last participant from a conference call
About this task
Note:
This feature is applicable only for a conference call of the AST 1 type.
Procedure
1. From the Phone screen, select your active call.
2. Press Drop once the conference is up.
The telephone drops the last added person from the conference.
Viewing the details for a conference
About this task
Note:
Depending on which server your extension is configured in, you might not be able to see
the details of a conference. If you are not able to view the details of a conference, contact
your system administrator.
Procedure
1.
On the Phone screen, select your active call.
Using the conference feature
56 Using Avaya 9608/9608G/9611G IP Deskphones SIP January 2014
Comments? infodev@avaya.com
To Next Page
Loading...
