Configuring simultaneous ringing for multiple phones using
EC500
About this task
Using
the EC500 feature, you can program your deskphone in such a way that the deskphone
and your cell phone rings simultaneously when there is an incoming call. With this feature, you
can answer office calls while you are away from your desk. The system administrator has to
add your cell phone number and program the desk phone.
Procedure
1. From the Phone screen, scroll right to access the Features menu.
2. Select EC 500.
3. Press OK to turn simultaneous ringing on or off.
Extending a call to your cell phone (EC500)
About this task
You can use the Extend Call feature to receive a call that is active on your office deskphone
on your mobile phone. The Extend Call feature uses EC500 Extension to Cellular. You to
transfer an office call to your mobile phone and move away from your desk. This feature is
programmed by your system administrator.
Note:
Only your administrator can set the destination mobile number.
Procedure
1. During an active call, gain access to the Features menu.
2. Scroll to Extend Call , and press OK to forward the call to your mobile phone.
3. Answer the call on your cell phone.
The call remains active on your deskphone, so you can switch back to your
deskphone at any time.
About Features
90 Using Avaya 9608/9608G/9611G IP Deskphones SIP January 2014
Comments? infodev@avaya.com
To Next Page
Loading...
