Avaya 9608 - Setting Redial Options; Configuring Visual Alerts; Setting the Audio Path

Setting redial options
About this task
Use
this task to view a list of last six numbers that you dialed or to dial the last dialed number
when you use the redial feature.
Procedure
1. Press Home.
2. Press Select to select Options & Settings > Call Settings > Redial.
3. Press Change to select one of the following options:
• One Number: To dial the last dialed number.
• List: To display the last six dialed number.
4. Press Save.
Configuring visual alerts
About this task
Use
this task to cause the LED in the top right corner of the phone to flash when the deskphone
gets incoming calls.
Procedure
1. Press Home.
2. Press Select to select Options & Settings > Call Settings > Visual Alerting.
3. Press Change to select On or Off.
4. Press Save.
Setting the audio path
You
can set your phone to go off-hook on the Speaker or the Headset when you make an on-
hook call.
Procedure
1. Press Home.
Avaya Menu
24 Using Avaya 9608/9608G/9611G IP Deskphones SIP January 2014
Comments? infodev@avaya.com