Related links
Setting up a Bluetooth
®
enabled headset on page 66
Operating a Bluetooth
®
headset
About this task
The information provided here is generic and might not apply to all wireless headsets, particularly
those that are not certified by Avaya. If you need specific information, see the relevant documents
provided with your headset.
Note:
Charge the battery of your Bluetooth
®
enabled headset according to the instructions of the
manufacturer.
Procedure
To use the Bluetooth headset, perform the following tasks:
• Press and hold the Power button for at least three seconds to turn the headset on or off.
- The Bluetooth icon on the headset flashes blue when the headset is on.
- If the battery is low, the Bluetooth icon flashes red. Recharge the battery according to the
instructions of the manufacturer.
• To answer or end a call, press the Call Control button on the headset.
• To make a call, press the Call Control button on the headset. After you hear the dial tone, start
dialing using dial pad.
• If you are using the phone handset, transfer the call to your headset by pressing the Headset
button. To transfer a call from your headset back to the handset, press the Headset button again,
or if the handset is still on-hook, pick up the handset.
Related links
Setting up a Bluetooth
®
enabled headset on page 66
Using the call timer
If your administrator has enabled the call timer feature for your deskphone, you can turn on the call
timer to keep a track of the duration of your calls. A softkey labeled Timer On displays on the
screen when you are on a call.
Procedure
1. To change the value of the displayed call timer, from Option and Settings, press the Call
setting button.
2. Select a Y or N value from the Display Call Timers field.
3. Click OK.
Customizing your phone
May 2016 Using Avaya 9621G/9641G/9641GS IP Deskphones H.323 68
Comments on this document? infodev@avaya.com
To Next Page
Loading...
