seamless handover between all DAPs. For an illustration of a simple SIP DECT configuration,
see Figure 6: Simple SIP DECT network configuration on page
29.
Figure 6: Simple SIP DECT network configuration
Routed Head Quarter configuration:
Routed Head Quarter Configuration is used for a Large Campus network that is split into
several subnets. In this configuration DAPs belong to various subnets and behave as one large
SIP
DECT system with the full support of seamless handover. IP multicast must be able to
occur between all DAPs in the Campus network, through IP switches and the IP routers that
connect the various subnets. For an illustration of a Routed Head Quarter configuration, see
Figure 7: SIP DECT configuration Routed Head Quarter on page 30
.
Types of SIP DECT configuration
SIP DECT Fundamentals October 2012 29
To Next Page
Loading...
