2. Scroll to Features, and press Select.
3. To enable Call Forward feature, scroll to one of the following options:
• Call Fwd
• Call Forward-Busy
• Call Forward-No Answer
4. Press Select.
5. In the Destination field, enter the number where you want to forward the incoming calls.
6. Press Save.
The phone generates a confirmation tone and returns to the Features screen.
7. To disable any of the Call Forward features, go to the respective screen and press Select.
Multiple Device Access
With the Multiple Device Access (MDA) feature, you can register up to 10 SIP devices with the
same extension to transfer active calls between devices.
This feature is available only in an Avaya Aura
®
environment. Multiple Device Access is configured
on Avaya Aura
®
Session Manager.
MDA limitations
There are limitations for Multiple Device Access as Avaya J129 IP Phone supports only two call
appearances, while the user might have more than two call appearances configured.
The limitations for Multiple Device Access are the following:
• There is no audio or visual alerting for the third incoming call if two call appearances are
already in use.
• The Avaya J129 IP Phonewill not display the third or higher call appearance.
• When you receive an MDA indication, press the Phone button to view the details and join the
bridged call.
Multicast Paging
With the Multicast Paging feature, you can receive a page that will be automatically played on the
phone. If configured by the system administrator, you can send a multicast page to a group of
phones in the network.
An incoming multicast page is played on the phone speaker. When the page is played, the Phone
screen displays the Page from <group name> notification during the whole time of
transmission.
Advanced features
January 2020 Using Avaya J129 IP Phone SIP 42
Comments on this document? infodev@avaya.com
To Next Page
Loading...
