initiate a group page, only you can speak. When you initiate a group page, the page continues till
you end it. However, the participants can drop out from the page individually.
To initiate a group page, you must know the group pilot number of the group that you are trying to
send a page to. To know about the group pilot number, contact your system administrator.
Procedure
1. Dial the group pilot number.
The extensions in the group that you are calling auto answer the page.
2. Wait for seven seconds before you speak as the phone requires that time to allow an audio
path.
3. Press End Call to stop paging.
Related links
Making an auto intercom call on page 46
Calling someone in your intercom group on page 46
Making an auto intercom call
About this task
Use the auto intercom feature to call a specific extension or intercom group.
Procedure
1. Before dialing, scroll right from the phone screen to access the Features screen.
2. Scroll down to Auto Icom and press OK or just press the corresponding line button.
Two numbers display with the Auto Icom feature, for example “Auto icom 2 3”. The first
number denotes the intercom group number for the Dial Intercom feature. The next
number denotes the extension your administrator has predefined as your automatic
intercom destination extension.
3. Press the number(s) that corresponds to the destination extension.
4. Press Enter or OK to activate the intercom call to that extension, where the call
appearance identifies the incoming call with your name followed by ICOM.
Related links
Initiating a group page on page 45
Calling someone in your intercom group
About this task
If your system administrator has set up an intercom group, you can call anyone in that group by
pressing a few numbers.
Advanced Call features
March 2018 Using Avaya J169/J179 IP Phones SIP 46
Comments on this document? infodev@avaya.com
To Next Page
Loading...
