Avaya J179 - Call Pickup Group; Answering a Call for a Call Pickup Group Member; Picking up a Call to Another Call Pickup Group; Initiating a Group Page

Before you begin
The feature is available only if the administrator enables the option for your extension.
Procedure
1. Access the Features screen during an active call.
2. Scroll down to Exclusion and press OK or just press the corresponding line button.
When you activate Exclusion during a call, all parties except you and the calling and the
called party are dropped from the call.
Call Pickup group
Answering a call for a call pickup group member
Procedure
1. From the Phone screen, gain access to the Features screen.
2. Scroll to Call Pickup and press Select or the corresponding line button.
Picking up a call to another call pickup group
About this task
When your administrator has set up this feature, you can answer a call ringing at a phone in a call
pickup group other than your own.
Procedure
1. Scroll right from the Phone screen to access the Features screen.
2. If necessary, scroll down to Extended Call Pickup and press OK or just press the
corresponding line button.
3. Answer the call using the pickup number and then press Enter or OK.
Initiating a group page
About this task
Using the Group Paging feature, you can make a call to a group of users that your system
administrator has set up for you. A group page supports only one-way audio. That is, when you
Call Pickup group
March 2018 Using Avaya J169/J179 IP Phones SIP 45
Comments on this document? infodev@avaya.com