Avaya J179 - Chapter 10: Holding Calls

Procedure
1. Press Main Menu.
2. Press Select to select Options & Settings > Screen & Sound Options > Text Size.
3. Press Change to select one of the following:
• Normal: To set the default text size.
• Large: To set the large text size.
4. Press Save.
Setting a ring tone for incoming forwarded calls
About this task
Use this task to specify the ring tone that you want to hear for incoming calls that are forwarded to
your phone. You can hear the ring tone that you specified for the:
• Caller.
• First phone that forwarded the call.
Procedure
1. Press Main Menu.
2. Press Select to select Options & Settings > Screen & Sound Options > Call Fwd Ring.
3. Press Change to select one of the following:
• Caller: To hear the ring tone that you specified for the caller.
• Forwarder: To hear the ring tone that you specified for the first phone that forwarded the
call.
4. Press Save.
Setting key repeat delay
About this task
Use this procedure to set the time for which you must press the navigation key to start the auto
repeat process. You can select from the following options:
• No Repeat
• Default
• Short
• Long
• Very Long
Procedure
1. Press Main Menu.
2. Press Select to select Options & Settings > Screen & Sound Options > Key Repeat
Delay.
Options & Settings
March 2018 Using Avaya J169/J179 IP Phones SIP 65
Comments on this document? infodev@avaya.com