Front panel (Portwell CAD-0208)
Number Component Description
1 Power LED This LED is illuminated when power to the
unit is turned on.
2 Status LED (D2) This LED flashes to indicate hard-disk-drive
activity.
3 Network Activity LEDs Four pairs of Active/Link LEDs labeled M1,
A1, A2, and B1.
Rear panel (Portwell CAD-0208)
Number
Component Description
1 Power On/Off Switch The Power On/Off switch turns system power on
and off.
2 Reset Button The system reset button.
This button is recessed and can be pressed
using the end of a paper clip. Use this button
only if directed to do so by qualified support
personnel or by the product documentation.
3 DC In Jack The DC Power Jack (15V).
Table continues…
Panel descriptions
August 2015 Deploying Avaya SBCE 15
Comments on this document? infodev@avaya.com
To Next Page
Loading...