Use this password for secure shell (ssh) access to the EMS.
A series of scripts automatically run to configure Avaya SBCE. As these scripts run, the
system displays a series of outputs indicating the progress of the configuration. The
configuration is successfully completed when the login prompt is displayed.
Related Links
Appliance Configuration field descriptions on page 64
Management Interface Setup field descriptions on page 65
Field descriptions
Appliance Configuration field descriptions
Name Description
E-SBC Appliance Name A descriptive name assigned to this Avaya SBCE
server.
This field is displayed for Avaya SBCE installations.
Note:
Ensure that the appliance name is unique for
Avaya SBCE servers.
EMS Appliance Name A descriptive name assigned to the EMS component
of this server.
This field is displayed only for EMS plus Avaya
SBCE installations.
Note:
Ensure that the appliance name is unique for
the EMS server.
Domain Suffix (Optional) The domain within which this server is deployed.
List of DNS Servers The IP address of each Domain Name Server
(DNS).
Note:
The list of DNS server names must be comma-
separated, with no spaces. Only two IP
addresses are allowed here.
Table continues…
Avaya SBCE configuration
64 Deploying Avaya SBCE August 2015
Comments on this document? infodev@avaya.com
To Next Page
Loading...