Figure 5: Multiple server deployment
Note:
When Avaya devices are all in the same subnet, you must use a one-wire deployment. For
example, using only interface A1 instead of interfaces A1 and B1 (signaling and media
interfaces). When Avaya devices are all within the DMZ, the use of internal or external firewalls
is optional, depending upon the deployment.
Caution:
Do not interrupt existing network connections without being thoroughly certain of how Avaya
SBCE is integrated into existing operations. If you are uncertain how to proceed, call Avaya
Customer Service for assistance.
Related Links
Configuring Avaya SBCE on page 62
Installing fix to correct ports for Dell R320 servers
About this task
Before installing Avaya SBCE on a Dell R320 server, you must run a fix to correct the ports for the
server.
Installation
50 Deploying Avaya SBCE August 2015
Comments on this document? infodev@avaya.com
To Next Page
Loading...
Need help?
General