• One rear-accessible VGA for system monitor
• One rear-accessible PS2 for Keyboard
• One rear-accessible PS2 for Mouse
• Two front-accessible USB 2.0 ports
• Two rear-accessible USB 2.0 ports
Portwell CAD-0208 (Core)
• Rear-accessible 32–bit gigabit Ethernet ports (RJ-45 connectors)
Port Interface
M1 (eth3) Management
A1 (eth2)
A2 (eth1)
B1 (eth0)
Note:
A1 ports are used for internal connection and B1 ports are used for external connection. To
prevent routing problems, the management interface (M1) must be configured on different
subnets than the subnets assigned to the A1, A2, or B1 data interface.
• One rear-accessible RJ45 serial port for system console
• One rear-accessible VGA for system monitor
• Two rear-accessible USB 2.0 ports
HP ProLiant DL360 G7
HP NC382T PCI Express Dual Port Gigabit NIC expansion card (Broadcom 5709 silicon) in addition
to four integrated ENET Gigabit NIC ports.
HP ProLiant DL360 G8
Four integrated ENET Gigabit NIC ports with TCP offload engine (included on motherboard).
Hardware overview
32 Deploying Avaya SBCE August 2015
Comments on this document? infodev@avaya.com
To Next Page
Loading...
Need help?
General