Model E1010 Indicator User Instructions 25
6. Press the UNITS key…
CLEAR is displayed. Use this item to clear all the information stored for
this application. WARNING - Only do this if you are sure you want the
information permanently removed!
You may want to print out the report before clearing all the information.
7. Press the ENTER key…
SURE? is displayed.
8. Press the ESC key to abort the save process or press the ENTER key to clear
all the information…
CLEAR is displayed.
9. Press the SELECT key…
TARGET is displayed.
COUNT (Counting Application)
1. Press the UNITS key…
COUNT is displayed. Use this item to clear and print reports for the
count application.
2. Press the PRINT key…
PRINT is displayed. Use this item to print out a complete report of count
application information.
3. Press the ENTER key …
Display shows BUSY briefly then returns to PRINT.
4. Press the UNITS key…
CLEAR is displayed. Use this item to clear all the information stored for
this application. WARNING - Only do this if you are sure you want the
information permanently removed!
You may want to print out the report before clearing all the information.
5. Press the ENTER key…
SURE? is displayed.
6. Press the ESC key to abort the save process or press the ENTER key to clear
all the information…
CLEAR is displayed.
7. Press the SELECT key…
COUNT is displayed.
To Next Page
Loading...
Need help?
General
