IFD500 Series Pilot Guide
Aux Subsystem 5-71
Terrain Caution Aural
This setting controls the content of the aural message that is
generated during FLTA caution conditions, with selections as
follows:
Caution Terrain – the aural message will say “Caution,
Terrain; Caution, Terrain”
Terrain Ahead – the aural message will say “Terrain
Ahead; Terrain Ahead”
The factory default setting is “Caution Terrain”.
Terrain Warning Aural
This setting controls the content of the aural message that is
generated during FLTA warning conditions, with selections as
follows:
Terrain Pull Up – the aural message will say “Terrain,
Pull Up; Terrain, Pull Up”
Terrain Terrain – the aural message will say “Terrain,
Terrain; Pull Up, Pull Up”
The factory default setting is “Terrain Pull Up”.
FLTA Exclusion Areas
This setting controls whether FLTA Exclusion areas around
airfields are enabled. The factory default setting is “On”.
If the FLTA setting is “Off”, this setting will not be shown.
To Next Page
Loading...
