IFD500 Series Pilot Guide
5-72 Aux Subsystem
TIME CATEGORY
Settings in this category control the presentation of time
throughout the system.
UTC
This item is not actually a setting and the cursor will skip it. It is
merely a display of the current UTC time to be used for reference
with the other settings.
Local Time Offset
This setting defines the time difference between UTC and local
time. The value ranges from -12 hours to +14 hours, in
increments of 15 minutes. The factory default setting is 0:00 (no
offset).
Time Format
This setting controls the display of time throughout the system.
Selections are as follows
UTC – time values are displayed as UTC times and will
be suffixed with “Z”
12 Hr – time values are displayed with respect to local
time and will be suffixed with “AM” or “PM”
24 Hr – time values are displayed with respect to local
time, ranging from 0:00 to 23:59, and will have no suffix.
The factory default setting is “12 Hr”.
To Next Page
Loading...
