IFD500 Series Pilot Guide
1-42 System Overview
Pressing it a second time will step the reverse video over
the Arrival field and present a drop down box of available
published arrivals. Each subsequent press of the
“PROC” key will step through all following destination
airfield approaches and arrivals in the flight plan and
wrap back around to the top of the flight plan. When the
drop down box appears over the intended data field, turn
the bottom right knob to scroll up or down the list until the
desired procedure is highlighted and then push the knob
in to add that procedure to the flight plan. If there is no
flight plan, pressing the “PROC” key will present the FPL
tab with an insert cursor at the top of the page but will not
present any procedures.
ENTR – The use can vary slightly depending on the
scenario, but “ENTR” is always related to the
Enter/Accept/Confirm use;
CLR – The use can vary slightly depending on the
scenario, but “CLR” is always related to
Clear/Backspace/CAS Message Clear use.
To Next Page
Loading...
