6. The finished wall arm installation should resemble the following image.
(Optional) Installing the Pendant NPT Mount
For installation environments where a wall is not available, you can also mount the pendant NPT mount to a
pipe.
Tip: We recommend using a 1-1/2” conduit pipe for mounting the pendant NPT.
Note: The NPT pipe and NPT-female to NPT-female adapter are not supplied by Avigilon and should
be sourced separately.
1. Pull the required cables through the NPT conduit pipe.
2. Apply thread seal tape to the pipe and screw on the 1-1/2” NPT female to NPT female pipe adapter.
(Optional) Installing the Pendant NPT Mount 33
To Next Page
Loading...
