It is recommended that the microSD card have a write speed of class 10 or better. If the microSD card does
not meet the recommended write speed, the recording performance may suffer and result in the loss of
frames or footage.
1. Insert a microSD card into the camera.
CAUTION — Do not force the microSD card into the camera or you may damage the card and
the camera. The microSD card can only be inserted in one direction.
2. Access the camera’s web interface to enable the onboard storage feature. For more information, see
the Avigilon IP Camera Web Interface User Guide.
Configuring the Camera
Once installed, use one of the following methods to configure the camera:
l
If you have the USB Wifi Adapter, you can access the mobile web interface to configure the camera.
For more information, see USB Wi-Fi Adapter System User Guide.
l
If you have installed multiple cameras, you can use the Camera Configuration Tool to configure
common settings. For more information, see the Camera Configuration Tool User Guide.
l
If the camera is connected to the Avigilon Control Center system, you can use the client software to
configure the camera. For more information, see the Avigilon Control Center Client User Guide.
l
If the camera is connected to a third-party network management system, you can configure the
camera's specialty features in the camera's web browser interface. For more information, see the
Avigilon IP Camera Web Interface User Guide.
For More Information
Additional information about setting up and using the device is available in the following guides:
l
Avigilon Control Center Client User Guide
l
Web Interface User Guide — Avigilon High Definition H6A and H6X IP Cameras
l
USB Wi-Fi Adapter System User Guide
l
Camera Configuration Tool User Guide
l
Designing a Site with Avigilon Video Analytics
These guides are available on help.avigilon.com and on the Avigilon website: avigilon.com/support.
Configuring the Camera 44
To Next Page
Loading...
Need help?
General
