24
Change More Copy Settings
You can customize copy jobs using the various settings available from the touch
panel, including the following:
• Copies
• Reducing or Enlarging the originals
• Color Mode
• Image Quality
• Density
• Output Printer
• Paper Tray
• Paper Size
• Preview
• Stamp
• Advanced Copy
Copies
Use the Copies feature to set the number of copies for the current copy jobs.
To select the number of copies:
1. Tap the [Copies dropdown list] button.
2. Under the Copies dropdown list, specify the number of copies by tapping any
number respectively in the left/right column. The maximum number is up to 99.
Reducing or Enlarging the Originals
Reduce the original to as little as 25% of its size or enlarge it as much as 200%.
To reduce an original’s image, tap the [Down arrow] button to specify a scaling
percentage that is less than 100. To enlarge the image, tap the [Up arrow] button
to specify a scaling percentage that is greater than 100.
You can also choose one of the preset values including 100%, 25%, 50%, 78%,
127%, 200%, and Fit to Page (Automatically rescaling your original to fit the output
paper) .
To Next Page
Loading...
