4
Using the Shortcut Button
To use a shortcut button,
1. Select and tap the green [Start] button of a shortcut button to use from the
shortcut button list on the main screen of the touch panel.
Note: If you want to change settings of your shortcut button before tapping
the green [Start] button, simply tap the [Change] button on the shortcut
button to update your settings, and then tap OK.
2. The product starts scanning and the preview image will be displayed.
3. On the Preview screen,
z If the scanned image is OK, press the [Start] button ( ) on the touch
panel or the [Scan] button (
) on the control panel to distribute the
scanned image. You may also insert more pages by taping the [Insert
Pages (
)] button on the bottom of the screen.
z If the scanned image is not OK, tap the [Cancel] button to abort the job.
4. The scanned images are sent to your specified destination.
Green Start Button
of Shortcut Button
To Next Page
Loading...
