73
LDAP Settings: Used to specify the product’s LDAP server information.
Item Description
Server Name Enter your LDAP server name.
IP/URL Enter your LDAP server IP or URL address.
Port# Enter the Port number of the LDAP server.
Login Name Enter the login name of the LDAP server.
Note:
1. In Microsoft Active Directory, some servers
may require you to add “domain name” as
your full login name. For example, if your
domain name is “company” and your user
name is “administrator”, then your full login
name is “company\administrator”.
2. When your LDAP server requests an
“anonymous login”, please leave your login
name and password blank instead of typing
“anonymous” as your login name and
password.
Password Enter the password of the LDAP server.
Base DN Enter your base DN. Base DN (distinguished
name) identifies the starting point of a search. A
dn indicates what record to view in an LDAP tree.
The top level of the LDAP directory tree is the base,
referred to as the "base DN". For example, you
could indicate a base of dc=com,dc=net for a
search that starts at the top and proceeds
downward.
SSL Enable Enable or disable SSL.
Choice: ON, *OFF
New/Delete/Modify Add/delete/modify a LDAP server.
Update Update a LDAP server information.
Quit Leave without updating a LDAP server information.
* Factory Default
To Next Page
Loading...
