116
Saving Energy at the LAN Ports
17.3 Saving Energy at the LAN Ports
For the individual LAN ports of your FRITZ!Box you can config-
ure various operation modes. The power consumption of
some modes is higher than others. Select the operation
mode that is best suited to your needs in order to minimize
the power consumption of the LAN ports.
The LAN ports can be configured in the FRITZ!Box user inter-
face. In the “System / Energy Monitor” menu, the following
operating modes are available on the “Settings” page:
Operating Mode Functionality and Power Consumption
Always enabled The LAN port is always enabled.
Highest power consumption.
Detect Automatical-
ly – Power Mode
As needed, the FRITZ!Box establishes LAN
connections with a data throughput rate of
1Gbit/s.
Lower power consumption than for the “Al-
ways Enabled” setting.
Detect Automatical-
ly – Green Mode
Default setting of the FRITZ!Box. As needed,
the FRITZ!Box establishes LAN connections
with a data throughput rate of 100 Mbit/s.
Lower power consumption than for the “En-
able Automatically - Power Mode” setting.
Disabled The LAN port is disabled and consumes no
power.
The first LAN port cannot be disabled.
FRITZ!Box_7360-en.fm Seite 116 Mittwoch, 15. Februar 2012 5:21 17
To Next Page
Loading...
Need help?
General
Weight and Dimensions
