AVM FRITZ!Box 7360 User Manual

Taking FRITZ!Box out of Operation
137
20 Taking FRITZ!Box out of Operation
In this chapter you receive tips and recommendations for taking the
FRITZ!Box out of operation.
20.1 FRITZ!Box Restoring the Factory Settings
Restore the factory settings of the FRITZ!Box. This is strongly
recommended if you are planning to pass the FRITZ!Box on to
another user.
Resetting the FRITZ!Box has the following effects:
• All settings you made in the FRITZ!Box are then deleted.
• The factory settings’ WLAN key will be activated again.
• The IP configuration of the factory settings will be re-
stored.
Restoring Factory Settings
1. In the FRITZ!Box user interface, select the “System / Re-
set” menu.
2. On the “Factory Settings” page, click the “Load Factory
Settings” button.
The FRITZ!Box is reset to its factory settings.
Please also follow our instructions for the correct disposal of
waste equipment on page 154.
FRITZ!Box_7360-en.fm Seite 137 Mittwoch, 15. Februar 2012 5:21 17

AVM FRITZ!Box 7360 Specifications

General

Plug and Play	Yes
Internal memory	512 MB
RJ-11 ports quantity	2
Ethernet LAN (RJ-45) ports	4
Bandwidth	2.4 GHz
Rack mounting	No
Ports quantity	The number of ports or external interfaces to which other equipment can be connected.
Frequency range	2.4 - 2.4835 GHz
Power supply type	DC/11W
Dimensions (WxDxH)	226 x 159 x 47 mm
USB connector type	USB Type-A
WLAN data transfer rates supported	300 Mbit/s
Cables included	LAN (RJ-45), Phone (RJ-11)
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates	100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
Firewall security	IPv6
Security algorithms	128-bit WEP, 64-bit WEP, WPA, WPA2
Power supply	11 W
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (typical)	8 W
Product color	Red

Weight and Dimensions

Depth	159 mm
Width	226 mm
Height	47 mm
Weight	- g