Configuring Connected Telephones and Terminal Devices
45
8.3 Configuring Connected Telephones and Terminal Devices
Once you have entered your telephone numbers in the
FRITZ!Box, set up the connected telephones, telephone sys-
tems, fax machines and answering machines in the
FRITZ!Box. During configuration you must define the follow-
ing, depending on the type of device:
• The telephone number the terminal device uses to place
outgoing calls to the public telephone network.
• Telephone numbers for accepting calls. A telephone can
be set to ring for all incoming calls or only for calls to cer-
tain telephone numbers.
• Internal name for the terminal device. This name will be
displayed, for instance, in the call list of the FRITZ!Box.
The “Manage Your Telephony Devices” Wizard assists you in
setting up the telephones and other terminal devices:
1. Open the FRITZ!Box user interface (see page 31).
2. Click “Wizards” in the menu.
3. Click “Configure Telephony Devices”.
You are presented with an overview of all telephones
and terminal devices that have already been set up.
4. Now you can set up a new terminal device or open the
settings of a terminal device:
To set up a new terminal device, click “Configure New
Device” and follow the Wizard’s instructions.
Click the “Edit” button to open the settings of a ter-
minal device.
All configured telephones and other terminal devices are dis-
played in an overview in the FRITZ!Box user interface. This
overview is found in the “Telephony / Telephony Devices”
menu. Here you can edit the settings of terminal device and
delete terminal devices.
FRITZ!Box_7360-en.fm Seite 45 Mittwoch, 15. Februar 2012 5:21 17
To Next Page
Loading...
Need help?
General
Weight and Dimensions
