To Next Page

To Previous Page

Configuring FRITZ!Box on the Telephone

129

19 Configuring FRITZ!Box on the Telephone

Various functions can be enabled and disabled using a telephone

connected to the FRITZ!Box. You can also restore the factory settings

of the FRITZ!Box using a telephone. Only tone-dialing (dual-tone mul-

tifrequency = DTMF) telephones can be used for configuration.

19.1 Restoring Factory Settings

When the factory settings are restored to the FRITZ!Box, all of

the settings in the FRITZ!Box are returned to their condition

upon delivery.

After factory settings are restored, the FRITZ!Box is restarted.

19.2 Switching WLAN On and Off

The WLAN function of your FRITZ!Box can be switched on and

off using a connected telephone.

All settings you made in the FRITZ!Box are deleted when the

factory settings are restored. This is also true for the config-

ured Internet connection.

Restoring Factory Settings

r991s159

01590s

Restores the settings in the FRITZ!Box to the

factory settings.

Switching WLAN On and Off

r96s1s Switches the WLAN function on.

r96s0s Switches the WLAN function off.

FRITZ!Box_7360-en.fm Seite 129 Mittwoch, 15. Februar 2012 5:21 17

Other manuals for AVM FRITZ!Box 7360

Questions and Answers:

Need help?

Do you have a question about the AVM FRITZ!Box 7360 and is the answer not in the manual?

General

Plug and Play	Yes
Internal memory	512 MB
RJ-11 ports quantity	2
Ethernet LAN (RJ-45) ports	4
Bandwidth	2.4 GHz
Rack mounting	No
Ports quantity	The number of ports or external interfaces to which other equipment can be connected.
Frequency range	2.4 - 2.4835 GHz
Power supply type	DC/11W
Dimensions (WxDxH)	226 x 159 x 47 mm
USB connector type	USB Type-A
WLAN data transfer rates supported	300 Mbit/s
Cables included	LAN (RJ-45), Phone (RJ-11)
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates	100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
Firewall security	IPv6
Security algorithms	128-bit WEP, 64-bit WEP, WPA, WPA2
Power supply	11 W
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (typical)	8 W
Product color	Red