AVM FRITZ!Box 7360 User Manual

40
Registering Smartphones with FRITZ!App Fon
7.3 Registering Smartphones with FRITZ!App Fon
The FRITZ!App Fon software connects your smartphone with
the FRITZ!Box via WLAN. Calls you make from home then use
not the mobile telephone network, but the telephone num-
bers set up in the FRITZ!Box.
The free FRITZ!App Fon software can be installed on an
iPhone, iPod or iPad with iOS4 or higher, and on Android
smartphones with Google Android 2.1 or higher.
FRITZ!App Fon for Android smartphones is available at the
Android Market
. FRITZ!App Fon for iOS is offered in the Apple
App Store.
Registering a Smartphone on FRITZ!Box
1. Install FRITZ!App Fon on your smartphone.
2. Connect your smartphone with the FRITZ!Box via WLAN.
To establish the connection you need the WLAN key of
the FRITZ!Box. The preconfigured WLAN key is printed on
the sticker on the underside of your FRITZ!Box.
3. Start the FRITZ!App Fon. If you protected the user inter-
face of the FRITZ!Box with a password, enter the pass-
word to log in.
Once FRITZ!App Fon has been started, use your smartphone
to make calls from home over the FRITZ!Box.
Defining Telephone Numbers for the Smartphone
A new telephone device for FRITZ!App Fon is entered automat-
ically in the FRITZ!Box. The name of the telephone device is
listed in the FRITZ!App Fon under “More / FRITZ!Box”.
You can assign telephone numbers to this telephone to deter-
mine which telephone numbers are used to make calls with
your smartphone from home. See the section Configuring
Connected Telephones and Terminal Devices on page 45 for
instructions.
FRITZ!Box_7360-en.fm Seite 40 Mittwoch, 15. Februar 2012 5:21 17

AVM FRITZ!Box 7360 Specifications

General

Plug and Play	Yes
Internal memory	512 MB
RJ-11 ports quantity	2
Ethernet LAN (RJ-45) ports	4
Bandwidth	2.4 GHz
Rack mounting	No
Ports quantity	The number of ports or external interfaces to which other equipment can be connected.
Frequency range	2.4 - 2.4835 GHz
Power supply type	DC/11W
Dimensions (WxDxH)	226 x 159 x 47 mm
USB connector type	USB Type-A
WLAN data transfer rates supported	300 Mbit/s
Cables included	LAN (RJ-45), Phone (RJ-11)
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates	100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
Firewall security	IPv6
Security algorithms	128-bit WEP, 64-bit WEP, WPA, WPA2
Power supply	11 W
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (typical)	8 W
Product color	Red

Weight and Dimensions

Depth	159 mm
Width	226 mm
Height	47 mm
Weight	- g