EasyManuals Logo

AVM FRITZ!Box 7360 User Manual

AVM FRITZ!Box 7360
180 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #50 background imageLoading...
Page #50 background image
50
Dynamic DNS: Name Instead of IP Address
Here is how to determine the public IP address of the
FRITZ!Box:
1. Open the FRITZ!Box user interface (see page 31).
2. Enable the expert settings in the “System / Expert
Mode” menu.
3. Open any Internet page in order to establish an Internet
connection.
4. The FRITZ!Box’s public IP address is displayed in the
“Overview” menu in the “Connections” area.
10.3 Dynamic DNS: Name Instead of IP Address
Dynamic DNS is an Internet service that makes it possible for
the FRITZ!Box to remain accessible from the Internet at all
times under a fixed name, even though the public IP address
changes.
You must register with a dynamic DNS provider to use this
service. When you register, you agree on the fixed name (do-
main name) at which your FRITZ!Box should be accessible
from the Internet. You also define a user name and password.
Every time the IP address changes, the FRITZ!Box transmits
the new IP address to the dynamic DNS provider in the form of
an update request. Then the domain name is assigned to the
current IP address by the dynamic DNS provider.
Setting Up Dynamic DNS in the FRITZ!Box
1. Open the FRITZ!Box user interface (see page 31).
2. Make sure that the expert mode is enabled in the “Sys-
tem / Expert Mode” menu.
3. Select the “Internet / Permit Access” menu.
Every time the Internet connection is interrupted the Internet
Service Provider re-assigns the IP address. The IP address
may change in the process. Therefore it is a good idea to use
dynamic DNS so that the IP address can always be reached
under the same name. For more information, see the section
Dynamic DNS: Name Instead of IP Address on page 50.
FRITZ!Box_7360-en.fm Seite 50 Mittwoch, 15. Februar 2012 5:21 17

Table of Contents

Other manuals for AVM FRITZ!Box 7360

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AVM FRITZ!Box 7360 and is the answer not in the manual?

AVM FRITZ!Box 7360 Specifications

General IconGeneral
Plug and PlayYes
Internal memory512 MB
RJ-11 ports quantity2
Ethernet LAN (RJ-45) ports4
Bandwidth2.4 GHz
Rack mountingNo
Ports quantityThe number of ports or external interfaces to which other equipment can be connected.
Frequency range2.4 - 2.4835 GHz
Power supply typeDC/11W
Dimensions (WxDxH)226 x 159 x 47 mm
USB connector typeUSB Type-A
WLAN data transfer rates supported300 Mbit/s
Cables includedLAN (RJ-45), Phone (RJ-11)
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standardWi-Fi 4 (802.11n)
Firewall securityIPv6
Security algorithms128-bit WEP, 64-bit WEP, WPA, WPA2
Power supply11 W
AC input voltage230 V
AC input frequency50 Hz
Power consumption (typical)8 W
Product colorRed
Weight and Dimensions IconWeight and Dimensions
Depth159 mm
Width226 mm
Height47 mm
Weight- g

Related product manuals